How does Sewing Project Manager set fabric aside for a project?

Short answer: Sewing Project Manager sets aside the fabric, notions and trims a project needs while the project is In Progress. When you mark the project Completed, the quantities are taken out of your stock once.

What it does

When you set the Project Status to In Progress, the yardage you entered in Yards Required is reserved on the Fabric linked to the project. Your stock record then shows how much of that fabric is spoken for.

Notions and trims

Under the Notions and Trims fields, the project form shows a Quantity Needed box for each item you link, such as 4 buttons or 2 yards of elastic. While the project is In Progress, that quantity is set aside. The Fabric, Notion or Trim form shows how much is set aside and how much is still free to use.

When the project is finished

When you set the Project Status to Completed, the yardage and the quantities are taken out of your stock. Saving the completed project again does not take them out twice. If you move the project back to Planning, the stock is put back.

Running low

If a notion or trim ends up at or under its Reorder Threshold, or the project needs more than you have, the item is added to your Shopping List.

If you do not have enough

If a project needs more than you have on hand, the app adds the difference to your Shopping List so you know exactly how much to buy.

Directional prints

If you turn on Plaid / Directional Print, the app adds a 20 percent waste buffer to the Yards Required before it reserves or compares, since matching a repeat takes extra fabric.

Where to see it

Open the project in Project Hub to see the linked fabric and Yards Required. Open the fabric in Textile Library to see its quantity and where it is stored.

One more thing: Sewing Project Manager at Frozen Arctic Apps keeps your stash and your projects in step, so your stock count stays right.